Electrolysis questions and answers (O level Chemistry)

Electrolysis questions and answers (O level Chemistry)

Electrolysis questions and answers for O level Chemistry students. In this post we will be looking at some questions from different O level past exam papers. Each question is followed by an expected solution. Important explanations and background information are given in italics.

Question 1

Electrolysis is often used in the extraction and purification of elements.

  1. Magnesium is manufactured by the electrolysis of molten magnesium chloride. Write equations for the two electrode reactions that occur during this electrolysis.
    ……………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………….[2]
  2. Copper can be purified using the electrolysis of aqueous copper(II) sulphate.

    (i) What is used as the anode (positive electrode)?
    ………………………………………………………………………………………………………………………[1]

    (ii) What is used as the cathode (negative electrode)?
    ………………………………………………………………………………………………………………………[1]

Solution 1

    (Since molten magnesium chloride is an electrolyte, it dissociates to produce Mg2+ ions and Cl ions. The cations, Mg2+, move to the cathode where they gain electrons to form Mg atoms. The anions, Cl, move to the anode where they loses electrons to form Cl atoms. The Cl atoms then pair up to make Cl2 since chlorine naturally exist in diatomic form.)

  1. at the cathode: Mg2+(l) + 2e → Mg(s)

    at the anode: 2Cl(l) – 2e → Cl2(g)

  2. During the purification of copper by electrolysis:

    (i) The anode is impure copper

    (ii) The cathode is pure copper

Question 2

Only liquids that contain moving ions can be electrolysed. These liquids are called electrolytes.

  1. Complete the following table which shows the products formed when some liquids are electrolysed using inert graphite electrodes.
    electrolyteions present in electrolyteproduct formed at the positive electrodeproduct formed at the negative electrode
    aqueous copper(II) sulphateCu2+, H+, OH and SO42–…………………………..…………………………..
    concentrated aqueous sodium chlorideH+, Na+, Cl and OHchlorinehydrogen
    molten lead(II) bromidePb2+ and Br…………………………..…………………………..
    [3]
  2. When concentrated aqueous sodium chloride is electrolysed, chlorine is formed at the positive electrode (anode) and hydrogen at the negative electrode (cathode).

    (i) Construct the ionic equation to show the formation of chlorine at the positive electrode.
    ………………………………………………………………………………………………………………………[1]

    (ii) Explain why hydrogen is formed at the negative electrode rather than sodium.

    ………………………………………………………………………………………………………………………………………………………………………………………………………………………………………………….[1]

  3. Name a metal manufactured by the electrolysis of a molten ionic compound.

    ……………………………………………………………………………………………………………………………..[1]

Solution 2

  1. Complete the following table which shows the products formed when some liquids are electrolysed using inert graphite electrodes.
    electrolyteions present in electrolyteproduct formed at the positive electrodeproduct formed at the negative electrode
    aqueous copper(II) sulphateCu2+, H+, OH and SO42–oxygencopper
    concentrated aqueous sodium chlorideH+, Na+, Cl and OHchlorinehydrogen
    molten lead(II) bromidePb2+ and Brbrominelead
    [3]
  2. (i) at the positive electrode: 2Cl(aq) – 2e → Cl2(g)

    (ii) Hydrogen is lower than sodium on the electrochemical series, which means hydrogen is discharged before sodium.

    (Ions of a less reactive element are more likely to be discharged before ions of a more reactive element.)

  3. magnesium, aluminium, or sodium

    (Reactive metals are extracted by electrolysis)

Question 3

Aluminium is manufactured by the electrolysis of aluminium oxide dissolved in molten cryolite.

  1. Give the equations for the reactions that occur at the electrodes during this electrolysis.

    positive electrode

    ……………………………………………………………………………………………………….

    negative electrode

    ………………………………………………………………………………………………… [2]

  2. Copper is purified using electrolysis. For this electrolysis name

    the electrolyte used,

    ……………………………………………………………………………………………

    the material used for the anode,

    …………………………………………………………………………..

    the material used for the cathode.

    ………………………………………………………………….. [3]

  3. Complete the following table about electrolysis using inert graphite electrodes.
    electrolyteproduct at cathodeproduct at anode
    molten lead(II) bromide
    aqueous copper(II) sulphatecopper
    dilute sulphuric acidoxygen
    [3]
  4. Describe one commercial use of electrolysis.

    use

    …………………………………………………………………………………………………………………..

    electrolyte used

    ………………………………………………………………………………………………….

    ionic equation for reaction at the cathode

    ………………………………………………………………[3]

Solution 3

    (Aluminium is extracted by electrolysis from its oxide, Al2O3, also known as bauxite. During electrolysis to extract aluminium, bauxite is mixed with sodium hexafluoroaluminate, Na3AlF6, better known as cryolite. Cryolite’s purpose is to lowers the melting point of bauxite to within economically viable temperatures.)

  1. positive electrode: 2O2-(l) – 4e → O2(g)

    negative electrode: Al3+(l) + 3e → Al(l)

  2. Electrolyte: Copper (II) sulphate

    Anode: Impure copper

    Cathode: Pure copper

  3. electrolyteproduct at cathodeproduct at anode
    molten lead(II) bromideleadbromine
    aqueous copper(II) sulphatecopperoxygen
    dilute sulphuric acidhydrogenoxygen
    [3]
  4. use: Extraction of magnesium

    electrolyte used: Molten magnesium chloride

    ionic equation for reaction at the cathode: Mg2+(l) + 2e → Mg(l)

Question 4

Electrolysis involves the decomposition of a compound by the passage of an electric current.

  1. (i) Complete the table, which relates to the electrolysis of different solutions using inert electrodes.
    electrolyteions in electrolyteproduct at anodeproduct at cathode
    dilute aqueous potassium nitrateK+, H+, OH and NO3oxygenhydrogen
    concentrated aqueous sodium chlorideNa+, H+, OH and Clchlorinehydrogen
    dilute aqueous copper(II) sulphateCu2+, SO42–, H+ and OH…………………………………………
    dilute sulphuric acid………………..oxygenhydrogen
    [3]
  2. The electrolysis of dilute aqueous sodium chloride liberates oxygen at the anode.

    Suggest why the electrolysis of concentrated aqueous sodium chloride liberates chlorine rather than oxygen.

    ………………………………………………………………………………………………………………………………………………………………………………………………………………………………….[1]

  3. Aqueous copper(II) sulphate was electrolysed using copper electrodes. The copper anode lost mass as copper(II) ions were formed and the copper cathode gained mass as copper atoms were formed.

    (i) State one industrial application of this electrolysis.

    ………………………………………………………………………………………………………………[1]

    (ii) The results of an experiment involving the electrolysis of aqueous copper(II) sulphate are shown below.

    temperature of electrolyte / °Ccurrent used / ampstime of electrolysis / smass of copper formed at the cathode / g
    201.010000.329
    202.010000.658
    202.020001.320
    252.020001.320
    301.010000.329

    Use the information in the table to describe how each of the variables affects the mass of copper formed at the cathode.

    temperature ……………………………………………………………………………………………………………………………………………………………………………………………………………………

    current …………………………………………………………………………………………………………………………………………………………………………………………………………………………..

    time …………………………………………………………………………………………………………………………………………………………………………………………………………………………..[3]

Solution 4

  1. electrolyteions in electrolyteproduct at anodeproduct at cathode
    dilute aqueous potassium nitrateK+, H+, OH and NO3oxygenhydrogen
    concentrated aqueous sodium chlorideNa+, H+, OH and Clchlorinehydrogen
    dilute aqueous copper(II) sulphateCu2+, SO42–, H+ and OHoxygencopper
    dilute sulphuric acidSO42–, H+ and OHoxygenhydrogen
  2. Concentrated sodium chloride has a higher concentration of chlorine ions than hydroxyl ions. Chlorine is discharged due to the higher concentration of chlorine ions.
  3. (i) Copper plating

    (ii) Temperature has no effect on the mass of copper formed during electrolysis.


    Current is directly proportional to the mass of copper formed during electrolysis, which means doubling the current doubles the mass.

    Time is directly proportional to the mass of copper formed during electrolysis, which means doubling the time doubles the mass.

Question 5

  1. Concentrated aqueous sodium chloride contains H+ and OH ions.

    (i) Give the formulae of two other ions present in concentrated aqueous sodium chloride.

    ………………………………………………………………………………………………………………[1]

    (ii) Concentrated aqueous sodium chloride is electrolysed using inert graphite electrodes.

    Name the product formed at each electrode.

    product at anode …………………………………………………………………………………………

    product at cathode …………………………………………………………………………………..[2]

  2. Impure copper can be purified by electrolysis.

    Draw a labelled diagram of the electrolytic cell that can be used to purify copper. [3]

    
    
    
    
    
    
    
    
    
    
    
    
    
  3. Aluminium is extracted commercially from an aluminium ore by electrolysis.

    (i) Name an ore containing aluminium.
    ………………………………………………………………………………………………………………[1]

    (ii) Name the element used as the anode in this process.
    ………………………………………………………………………………………………………………[1]

Solution 5

  1. (i) Na+ and Cl
  2. (ii) Product at anode: chlorine

    Product at cathode: hydrogen

  3. Electrolysis of copper sulphate

  4. (i) Bauxite

    (ii) Carbon

Question 6

Electrolysis is the decomposition of a liquid by the passage of an electrical current.

  1. Aqueous copper(II) sulphate contains the following ions, Cu2+, H+, OH and SO42–.

    Aqueous copper(II) sulphate can be electrolysed using inert electrodes. The electrode reactions are represented below.

    cathode Cu2+ + 2e → Cu

    anode 4OH → O2 + 2H2O + 4e

    (i) Explain why copper, not hydrogen, is formed at the cathode.

    ………………………………………………………………………………………………………………………………………………………………………………………………………………………………………

    (ii) Explain why the formation of oxygen at the anode is an example of oxidation.

    ……………………………………………………………………………………………………………………………………………………………………………………………………………………………………….

    (iii) The electrolysis of aqueous copper(II) sulphate using copper electrodes has a different anode reaction.

    Give the equation for the electrode reaction at the anode.
    …………………………………………………………………………………………………………………..
    [3]

  2. Molten lead(II) bromide decomposes when an electric current is passed through it.

    (i) Explain why solid lead(II) bromide will not conduct electricity but molten lead(II) bromide will.
    …………………………………………………………………………………………………………………..
    …………………………………………………………………………………………………………………..
    …………………………………………………………………………………………………………………..

    (ii) Construct the equations for the two electrode reactions.

    cathode ………………………………………………………………………………………………………

    anode …………………………………………………………………………………………………………
    [4]

Solution 6

  1. (i) Copper is lower than hydrogen on the electrochemical series, which means copper is discharged before hydrogen.

    (ii) Oxidation is the loss of electrons. Therefore the formation of oxygen at the anode is oxidation because it involves the loss of electrons by the hydroxyl ion.

    (iii) (For the electrolysis of aqueous copper(II) sulphate using copper electrodes, the copper anode dissolves to form copper ions.)

    The electrode reaction at the anode: Cu → Cu2+ + 2e

  2. i) During electrolysis an electric current is carried by moving ions. The ions in solid lead (II) bromide are not mobile, whereas the ions in molten lead (II) are mobile.

    ii) at the cathode: Pb2+(l) + 2e → Pb(s)

    at the anode: 2Br(l) – 2e → Br2(g)

Sir Sydney
Author: Sir Sydney

Tutor at Sytech Learning Academy.

4 1 vote
Article Rating
Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

0 Comments
Inline Feedbacks
View all comments

Sir Sydney

Tutor at Sytech Learning Academy.